وارنینگ ایتبس به خاطر پی دلتا

سلام دوستان من یک سازه بتنی رو انالیز کردم چند تا وارنینگ داد و پی دلتا رو خاموش کردم و خطا ها رو برطرف کردم ولی وقتی دوباره ران کردم وارنینگ میده یعنی بدون پی دلتا وارنینگ نداره و با پی دلتا وارنینگ داره ممنون میشم راهنمایی کنید *** Warning Message 1 *** Date & Time : 2/9/2023 11:13:35 PM Computer : DESKTOP-QHVKSSC Run Tag : 0 Run Serial : 1 Operation : RUNNING ANALYSIS Load Case : ~P-DELTA THE STRUCTURE IS UNSTABLE OR ILL-CONDITIONED !! CHECK THE STRUCTURE CAREFULLY FOR: - INADEQUATE SUPPORT CONDITIONS, OR - ONE OR MORE INTERNAL MECHANISMS, OR - ZERO OR NEGATIVE STIFFNESS PROPERTIES, OR - EXTREMELY LARGE STIFFNESS PROPERTIES, OR - BUCKLING DUE TO P-DELTA OR GEOMETRIC NONLINEARITY, OR - A FREQUENCY SHIFT (IF ANY) ONTO A NATURAL FREQUENCY TO OBTAIN FURTHER INFORMATION, RUN AN EIGEN ANALYSIS FROM THE END OF THIS NONLINEAR CASE USING AUTO FREQUENCY SHIFTING (WITH ADDITIONAL MASS IF NEEDED) AND INVESTIGATE THE MODE SHAPES *** Warning Message 2 *** Date & Time : 2/9/2023 11:13:36 PM Computer : DESKTOP-QHVKSSC Run Tag : 0 Run Serial : 1 Operation : RUNNING ANALYSIS Load Case : Solving Linear Stiffness from the end of Case ~P-DELTA THE STRUCTURE IS UNSTABLE OR ILL-CONDITIONED !! CHECK THE STRUCTURE CAREFULLY FOR: - INADEQUATE SUPPORT CONDITIONS, OR - ONE OR MORE INTERNAL MECHANISMS, OR - ZERO OR NEGATIVE STIFFNESS PROPERTIES, OR - EXTREMELY LARGE STIFFNESS PROPERTIES, OR - BUCKLING DUE TO P-DELTA OR GEOMETRIC NONLINEARITY, OR - A FREQUENCY SHIFT (IF ANY) ONTO A NATURAL FREQUENCY توضیحات به پیوست ضمیمه گردید